Nov 05, 2024

Storage Shelf Installation Steps

Leave a message

 

The installation steps of storage shelves mainly include the following key links:

Install beams and columns: First, place the two column pieces according to the distance of the beams, then install the lower beam, and clamp the two ends of the beam in the diamond holes of the column. After completing the installation of one beam, install the beam on the other side, and proceed in sequence. ‌

Install shelves or partitions: After the beams are installed, install the shelves or partitions in sequence.

Fix each component: After all the shelves are installed, pat each part of the shelf hard to ensure that it is firmly installed.

‌The following points should be noted during the installation process:

Use appropriate tools and equipment: Ensure that all tools and equipment used comply with the provisions of the current national metrology regulations, and the accuracy level is not lower than the accuracy level required for installation. ‌
Construct according to the construction drawings: The installation of shelves should be carried out strictly in accordance with the construction drawings, and no changes can be made without authorization.
‌Concealed engineering inspection‌: Concealed engineering before installation should be inspected before the engineering is concealed, and construction can only be continued after passing the inspection.
‌Adjust the shelf horizontally and vertically‌: After the shelf is installed, it should be adjusted horizontally and vertically, and the beam load-bearing test should be carried out to test the beam deflection.
‌Fasteners processing‌: All fasteners should be tightened, and the countersunk heads should be buried in the components and should not be exposed.
These steps and precautions can help ensure the stability and safety of storage shelves.

Send Inquiry